Myenergi eddi Eco-Smart Energy Diverter EDDI-16A1P02H £360 plus VAT

Free hot water & heating using excess energy from Solar PV £360 plus VAT
Read More...

Options

Myenergi eddi Eco-Smart Energy Diverter EDDI-16A1P02H £360 plus VAT Eddi-1
£432.00

eddi is an eco-smart energy management system. It diverts surplus power from solar PV or wind generation to a designated heating appliance such as an immersion heater. This excess energy will go directly to the appliance (or two sequentially). eddi allows you to stop exporting surplus energy back to the grid and saves you money on your energy bill.
Contact us here for an installation quote.

eddi datasheet

eddi Features
  • 3.68kW / 16A max heater load Supports two heaters (sequentially)
  • Expansion module option – 2 extra outputs with temperature control
  • Wall mounting bracket for ease of installation
  • Integral bypass switch Overload and short-circuit protection
  • Graphical back-lit LCD screen for ease of use
  • Ethernet port and built-in WiFi for connecting to the internet
  • Fan-less cooling
  • Complies with CE and UKCA Requirements
  • Built-in programmable boost timers
  • Works alongside battery storage systems
  • VariSineTM PWM technology
  • Energy monitoring on the go via the myenergi app

Performance

  • Power Control Technology: VariSineTM pure sine wave (Pulse Width Modulation)
  • Outputs: 2 (Sequential operation with selectable priority) Bypass Switch: Integral On/Off/Bypass Switch
  • Cooling: Rear mounted passive cooled heatsink
  • Indicators: LED indication: Supply On. Heater 1 and Heater 2 active
  • Display: Graphical LCD with LED backlight (Shows heating status and savings data)
  • PWM Resolution: 0.1%
  • Measurement Accuracy: +/- 1%
  • Power Conversion Efficiency: 97.5% typ.
  • Compliance: LVD 2014/35/EU, EMC 2014/30/EU, EN 60335-1 :2012, EN 55014-
  • 1 :2006, EN 55014-2 :1997, +A1 :2001+A2 :2008, EN 61000-3-
  • 2 :2006, +A1 :2009+A2 :2009, EN61000-3-3 :2008
Electrical specs
  • Rated Input Power: 3.68kW
  • Rated Supply Voltage: 230V AC Single Phase (+/- 10%)
  • Supply Frequency: 50Hz
  • Rated Current: 16A
  • Standby Power Consumption: 3W Typical
  • Generator Size Supported: No limit (Subject to 100A per phase grid supply1)
  • Heater Load Size: 100W min. 3.68kW max.
  • Wireless Interface: 868 / 915MHz (proprietary protocol) for wireless sensor and remote monitoring options
  • Grid Current Sensor: 100A max. primary current, 16mm max. cable diameter
  • Supply Cable Entry: Bottom Entry

    Mechanical Specs
  • Dimensions: 220 x 205 x 87mm (excluding wall bracket)
  • Weight: 4.3Kg (excluding wall bracket)
  • Protection Degree: IP20
  • Enclosure Material: Painted Zintec Steel
  • Operating Temperature: -20°C to +40°C
  • Mounting Method: Wall Mounting Bracket

Relay & Sensor Board (Optional)

  • Economy Tariff Sense Input (eSense): 230V AC sensing (2.5kV isolated)
  • Multifunction Relay: 2x 16 Amp
  • Temperature Sensor Inputs: 2x PT1000
Model number
EDDI-16A1P02H