myenergi Zappi black tethered 22kw ZAPPI-2H22TB

zappi Charge your EV with your PV
Read More...

Options

myenergi Zappi black tethered 22kw ZAPPI-2H22TB zappi-B-tethered-22kw
£939.00

zappi has 3 charging modes which makes it great for all homeowners. Those with grid-tied microgeneration systems like wind or solar can use the eco setting to save on their energy bills.

We install EV Charging points in the following postcodes contact us here for a FREE quote
DN14, DN15, DN16, DN17, DN18, DN19, DN20, DN21, DN22, DN31, DN32, DN33, DN34, DN35, DN36, DN37, DN38, DN39, DN40, DN41

The charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charging station.

  • EV charging from surplus solar or wind generation
  • Dynamic load balancing for maximum installation flexibility
  • Advanced integral safety features

zappi features

  • 3 Charging Modes: ECO, ECO+ and FAST
  • Tap Operated Display Backlight
  • Optimises Microgeneration Self-consumption
  • Built-in RCD Protection
  • Works with Solar PV or Wind Turbine Systems
  • Integral Cable Holster (Tethered Version)
  • Economy Tariff Sense Input
  • Remote Control & Monitoring
  • Programmable Timer Function
  • Supplied with Clip-on Grid Sensor(s)
  • Charge & Event Logging
  • Works Alongside Battery Storage System
  • Pin-code Lock Function Future
  • Proof Installation
  • OZEV (Home/Work Scheme) Approved
  • 3 Year Warranty
  • Ethernet Port and built-in WiFi for Connecting to the Internet
  • Complies with CE and UKCA Requirements

Charging modes

ECO
Charge power is continuously
adjusted in response to changes in
generation or power consumption
elsewhere in the home. Charging
will continue until the vehicle is
fully charged, even if power is
drawn from the grid.

ECO+
Charge power is continuously adjusted
in response to changes in generation or
power consumption elsewhere in the
home. Charging will pause if there is
too much imported power, continuing
only when there is surplus free power
available.


FAST

In this mode, the vehicle will be charged
at maximum power. This is just like an
ordinary Mode 3 charging point.

Performance

Mounting Location Indoor or Outdoor (Permanent Mounting)
Charging
Mode 3 (IEC 61851-1 Compliant Communication Protocol
Display
Graphical Backlit LCD
Front
LED Multicolour, According to Charge Status and Current
Charging Current
6A to 32A (Variable)
Dynamic Load Balancing
Optional Setting to Limit Current Drawn from the Unit Supply or the Grid
Connector Type
Type 2 Tethered Cable (6.5m) or Type 2 Socket with Locking System
Charging Profile
3 Charging Modes: ECO, ECO + and FAST
Metering Accuracy
Load and External CTs Designed to Meet Class B (1%) of EN 50470

  • Load: 0.25A-5(32)A
  • External CTs: 0.25A-5(100)A

In addition to the wide range of voltages below the eSense In addition to the wide range of voltages below the eSense input can also work with a volt free contact.

  • Range 3.3-230Vrms
  • Volt Free Contact (24Vdc Supplied from the zappi)

Compliance LVD2014/35/EU, EMC 2014/30/EU, EN 61851-1:2019*, EN 62916-2:2017, ROHS 2011/65/EU, CE Certified 2014/53/EU (RED), 2011/65/EU (RoHS), 2014/30/EU (EMC), 2014/35/EU (LVD).

*Complies fully with the requirements of EN61851-1:2019 with the exception of Clause 8.4 in order to meet the requirements of BS7671:2018 Amendment 1:2020. BS7671:2018 requires the protective earth conductor be switched in order to provide protection against a damaged PEN conductor in a TN-C-S earthed system.

Electrical specs

Rated Power 7kW (Single Phase)
Rated Supply Voltage
230V AC Single Phase or 400V AC 3-Phase (+/- 10%)
Supply Frequency
50Hz
Rated Current
32A max.
Standby Power Consumption
3W
Integral Earth Leakage Protection
30mA Type A RCD + 6mA DC Protection (EN 62955) Note : Local electrical installation Regulations may require a separate RCD
Economy Tariff Sense
Input 3.3 - 230Vrms AC Sensing (4.0kV Isolated)
Volt Free Contact
(24Vdc Supplied from the zappi)
Wireless Interface
868/915 MHz (Proprietary Protocol) for Wireless Sensor and Remote Monitoring Options
Grid Current Sensor
100A max. Primary Current, 16mm max, Cable Diameter
Cable Entry
Rear, Bottom or Side

Mechanics specs

Enclosure Dimensions 439 x 282 x 122mm
Protection Degree
IP65 (Weatherproof)
Enclosure Material
PC/ASA (Batch dependant)
Operating Temperature
-25 °C to +40 °C
Impact Resistant
IK10

Installation requirements

Circuit Breaker 32A Curve B
Earthing Arrangement
TN: Can be Connected to the PME Supply. Complies with BS7671:2018-amd1:2020 722.411.4.1 (v)
TT: Earth Resistance < 200 Ω according to BS 7671:2018 or <100 Ω for some vehicles.
Check Local Wiring Regulations for a Separate Type A RCD.

For a FREE installation quote please click here.

OUR INSTALLATION TEAM COVERS THE FOLLOWING POSTCODES:

DN15, DN16, DN17, DN18, DN19, DN20, DN21, DN31, DN32, DN33, DN34, DN35, DN36, DN37, DN38, DN39, DN40, DN41, HU1, HU2, HU3, HU4, HU5, HU6, HU7 ,HU8, HU9, HU10, HU11, HU12, HU13, HU14, HU15, HU16, HU17, HU18, HU19, HU20, LN1, LN2, LN3, LN4, LN5, LN6, LN7, LN8, LN9, LN10, LN11, LN12, LN13.